All MIBs › HPN-ICF-BFD-STD-MIB › hpnicfBfdSessRemoteAddr
hpnicfBfdSessRemoteAddr
Module: HPN-ICF-BFD-STD-MIB
OID (symbolic): HPN-ICF-BFD-STD-MIB::hpnicfBfdSessRemoteAddr
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface.
What is hpnicfBfdSessRemoteAddr?
The IP address of the remote peer this BFD session is monitoring. It's the address an admin checks to confirm the session is tracking the correct neighbor when troubleshooting an unexpected route or BGP session drop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10 snmpwalk -v2c -c public <target> HPN-ICF-BFD-STD-MIB::hpnicfBfdSessRemoteAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10.1 snmpget -v2c -c public <target> HPN-ICF-BFD-STD-MIB::hpnicfBfdSessRemoteAddr.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfBfdSessRemoteAddr.1
Start monitoring HP Networking / H3C ICF-based router or switch (BFD fast-failure detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-BFD-STD-MIB::hpnicfBfdSessRemoteAddr OID value, configure state conditions and alerts, and monitor any HP Networking / H3C ICF-based router or switch (BFD fast-failure detection) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.72 | hpnicfBfdMIB | HPN-ICF-BFD-STD-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.72.1 | hpnicfBfdObjects | HPN-ICF-BFD-STD-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.72.1.3 | hpnicfBfdSessTable | HPN-ICF-BFD-STD-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1 | hpnicfBfdSessEntry | HPN-ICF-BFD-STD-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10 | hpnicfBfdSessRemoteAddr | HPN-ICF-BFD-STD-MIB |