HPN-ICF-BFD-STD-MIB :: hpnicfBfdIfAuthType

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HPN-ICF-BFD-STD-MIB › hpnicfBfdIfAuthType

hpnicfBfdIfAuthType

Module: HPN-ICF-BFD-STD-MIB

OID (symbolic): HPN-ICF-BFD-STD-MIB::hpnicfBfdIfAuthType

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The Authentication Type used for this interface. This field is valid only when the Authentication Present bit is set.

The 'none' indicates the session doesn't support authentication. The 'simple' indicates the session supports simple password authentication. The 'md5' indicates the session supports Keyed MD5 authentication. The 'mmd5' indicates the session supports Meticulous Keyed MD5 authentication. The 'sha1' indicates the session supports Keyed SHA1 authentication. The 'msha1' indicates the session supports Meticulous Keyed SHA1 authentication.

What is hpnicfBfdIfAuthType?

Selects the authentication scheme used for BFD control packets on this interface — none, simple password, keyed/meticulous-keyed MD5, or keyed/meticulous-keyed SHA1. Admins set this to md5 or sha1 rather than simple or none when BFD sessions run over untrusted paths.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5
snmpwalk -v2c -c public <target> HPN-ICF-BFD-STD-MIB::hpnicfBfdIfAuthType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5.1
snmpget -v2c -c public <target> HPN-ICF-BFD-STD-MIB::hpnicfBfdIfAuthType.1

Start monitoring HP Networking / H3C ICF-based router or switch (BFD fast-failure detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-BFD-STD-MIB::hpnicfBfdIfAuthType OID value, configure state conditions and alerts, and monitor any HP Networking / H3C ICF-based router or switch (BFD fast-failure detection) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.72hpnicfBfdMIBHPN-ICF-BFD-STD-MIB
1.3.6.1.4.1.11.2.14.11.15.2.72.1hpnicfBfdObjectsHPN-ICF-BFD-STD-MIB
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2hpnicfBfdIfTableHPN-ICF-BFD-STD-MIB
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1hpnicfBfdIfEntryHPN-ICF-BFD-STD-MIB
1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5hpnicfBfdIfAuthTypeHPN-ICF-BFD-STD-MIB