All MIBs › HPICFHIGHAVAILABILITY-MIB › hpicfHARedundancyManagementModuleMode
hpicfHARedundancyManagementModuleMode
Module: HPICFHIGHAVAILABILITY-MIB
OID (symbolic): HPICFHIGHAVAILABILITY-MIB::hpicfHARedundancyManagementModuleMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.11.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specify to enable/disable this feature. Enabling allows for management module redundancy when there are two management modules in the switch and does a hitless failover. Disabling prevents redundancy except due to fatal hardware errors on one management module. warmStandby option does a non-hitless failover.
What is hpicfHARedundancyManagementModuleMode?
This object configures whether management-module redundancy is enabled, disabled, or running in warm-standby mode on switches with two management modules. Setting it to enable(1) allows a hitless failover between management modules if the active one fails, while warmStandby(3) permits failover but without the hitless (uninterrupted) guarantee, and disable(2) allows failover only after a fatal hardware error. An admin running a dual-management-module chassis in production would set this to enable(1) to ensure a management module failure doesn't interrupt traffic forwarding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.11.1.1 snmpwalk -v2c -c public <target> HPICFHIGHAVAILABILITY-MIB::hpicfHARedundancyManagementModuleMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.11.1.1.1 snmpget -v2c -c public <target> HPICFHIGHAVAILABILITY-MIB::hpicfHARedundancyManagementModuleMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.11.1.1.1 i <value>
Start monitoring HP ProCurve modular chassis switch (dual-supervisor high availability) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPICFHIGHAVAILABILITY-MIB::hpicfHARedundancyManagementModuleMode OID value, configure state conditions and alerts, and monitor any HP ProCurve modular chassis switch (dual-supervisor high availability) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.11 | hpicfHighAvailability | HPICFHIGHAVAILABILITY-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.11.1 | hpicfHAConfigObjects | HPICFHIGHAVAILABILITY-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.11.1.1 | hpicfHARedundancyManagementModuleMode | HPICFHIGHAVAILABILITY-MIB |