All MIBs › HP-SYSTEM-MIB › hpFailoverNotificationEnabled
hpFailoverNotificationEnabled
Module: HP-SYSTEM-MIB
OID (symbolic): HP-SYSTEM-MIB::hpFailoverNotificationEnabled
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object controls whether a hpFailover notification will be sent in the event of a failover occurrence between a primary and standby system. By default this object is set to false(2) for all systems.
What is hpFailoverNotificationEnabled?
Controls whether the device sends an hpFailover trap when a standby system in a redundant pair takes over as primary. Defaults to false (disabled) on all systems; this object is not currently supported and will report dummy values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1 snmpwalk -v2c -c public <target> HP-SYSTEM-MIB::hpFailoverNotificationEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1.1 snmpget -v2c -c public <target> HP-SYSTEM-MIB::hpFailoverNotificationEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1.1 s <value>
Start monitoring HP ProCurve switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SYSTEM-MIB::hpFailoverNotificationEnabled OID value, configure state conditions and alerts, and monitor any HP ProCurve switches from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.17 | hpSwitchJ4819A | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.17.7 | hpSwitchModuleJ8162A | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.17.7.1 | hpProcurveCommon | HP-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1 | hpProcurveSystem | HP-SYSTEM-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2 | hpSystemMIBObjects | HP-SYSTEM-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3 | hpNotificationsConfig | HP-SYSTEM-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1 | hpFailoverNotificationEnabled | HP-SYSTEM-MIB |