All MIBs › HP-SN-VSRP-MIB › snVsrpVirRtrTrackPortList
snVsrpVirRtrTrackPortList
Module: HP-SN-VSRP-MIB
OID (symbolic): HP-SN-VSRP-MIB::snVsrpVirRtrTrackPortList
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VSRP physical track port membership.
What is snVsrpVirRtrTrackPortList?
The list of physical and virtual ports whose link state VSRP monitors for this virtual router, range-encoded as ifIndex pairs; when a tracked port goes down the interface's priority is lowered, and it's restored when the port comes back up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 snmpwalk -v2c -c public <target> HP-SN-VSRP-MIB::snVsrpVirRtrTrackPortList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13.1 snmpget -v2c -c public <target> HP-SN-VSRP-MIB::snVsrpVirRtrTrackPortList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13.1 s <value>
Start monitoring HP SN switch/router (Foundry-heritage, VSRP redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-VSRP-MIB::snVsrpVirRtrTrackPortList OID value, configure state conditions and alerts, and monitor any HP SN switch/router (Foundry-heritage, VSRP redundancy) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1 | switch | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3 | snSwitch | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21 | snVsrp | HP-SN-SWITCH-GROUP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3 | snVsrpVirRtr | HP-SN-VSRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1 | snVsrpVirRtrTable | HP-SN-VSRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1 | snVsrpVirRtrEntry | HP-SN-VSRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 | snVsrpVirRtrTrackPortList | HP-SN-VSRP-MIB |