All MIBs › HP-SN-IP-MIB › snDvmrpDefaultRoute
snDvmrpDefaultRoute
Module: HP-SN-IP-MIB
OID (symbolic): HP-SN-IP-MIB::snDvmrpDefaultRoute
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description:
This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12 snmpwalk -v2c -c public <target> HP-SN-IP-MIB::snDvmrpDefaultRoute
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12.1 snmpget -v2c -c public <target> HP-SN-IP-MIB::snDvmrpDefaultRoute.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12.1 a <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.3 | hpSystem | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5 | snDvmrp | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1 | snDvmrpMIBObjects | HP-SN-IP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12 | snDvmrpDefaultRoute | HP-SN-IP-MIB |