All MIBs › HP-PROCURVE-420-PRIVATE-MIB › hpdot11RTSThreshold
hpdot11RTSThreshold
Module: HP-PROCURVE-420-PRIVATE-MIB
OID (symbolic): HP-PROCURVE-420-PRIVATE-MIB::hpdot11RTSThreshold
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
What is hpdot11RTSThreshold?
Sets the frame size, in octets, above which the radio performs an RTS/CTS handshake before transmitting; lowering it toward 0 forces RTS/CTS on all data/management frames (useful in noisy or hidden-node environments), while raising it above the maximum frame size effectively disables RTS/CTS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2 snmpwalk -v2c -c public <target> HP-PROCURVE-420-PRIVATE-MIB::hpdot11RTSThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2.1 snmpget -v2c -c public <target> HP-PROCURVE-420-PRIVATE-MIB::hpdot11RTSThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2.1 i <value>
Start monitoring Legacy HP ProCurve 420 wireless access point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-PROCURVE-420-PRIVATE-MIB::hpdot11RTSThreshold OID value, configure state conditions and alerts, and monitor any Legacy HP ProCurve 420 wireless access point from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37 | hpSwitchJ8130A | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.37.7 | enterpriseAPdot11 | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3 | hpdot11mac | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1 | hpdot11OperationTable | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1 | hpdot11OperationEntry | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2 | hpdot11RTSThreshold | HP-PROCURVE-420-PRIVATE-MIB |