All MIBs › HP-PROCURVE-420-PRIVATE-MIB › hpdot11FragmentationThreshold
hpdot11FragmentationThreshold
Module: HP-PROCURVE-420-PRIVATE-MIB
OID (symbolic): HP-PROCURVE-420-PRIVATE-MIB::hpdot11FragmentationThreshold
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute shall specify the mandatory maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
What is hpdot11FragmentationThreshold?
Sets the maximum frame size, in octets, that the radio will send without fragmenting it; smaller values improve resilience to interference at the cost of extra overhead, and the value can never go below 256.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3 snmpwalk -v2c -c public <target> HP-PROCURVE-420-PRIVATE-MIB::hpdot11FragmentationThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3.1 snmpget -v2c -c public <target> HP-PROCURVE-420-PRIVATE-MIB::hpdot11FragmentationThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3.1 i <value>
Start monitoring Legacy HP ProCurve 420 wireless access point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-PROCURVE-420-PRIVATE-MIB::hpdot11FragmentationThreshold OID value, configure state conditions and alerts, and monitor any Legacy HP ProCurve 420 wireless access point from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37 | hpSwitchJ8130A | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.37.7 | enterpriseAPdot11 | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3 | hpdot11mac | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1 | hpdot11OperationTable | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1 | hpdot11OperationEntry | HP-PROCURVE-420-PRIVATE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3 | hpdot11FragmentationThreshold | HP-PROCURVE-420-PRIVATE-MIB |