All MIBs › HP-ICF-RATE-LIMIT-MIB › hpUnknownUnicastLimitPortControlMode
hpUnknownUnicastLimitPortControlMode
Module: HP-ICF-RATE-LIMIT-MIB
OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpUnknownUnicastLimitPortControlMode
OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The mode by which unknown-unicast ingress traffic on this port will be rate limited. If unknownUnicastLimitPerPortOnly is configured, the limit will be a percentage of the current line rate of the port. The percentage is specified in hpUnknownUnicastLimitPortSingleControlPrct. If unknownUnicastLimitPerPortOnlyKbpsMode is configured, the limit will be an absolute value in kilobits-per-second. The kbps rate is specified in hpUnknownUnicastLimitPortSingleControlKbps. If disabled is configured, any unknown-unicast rate limit will be removed.
What is hpUnknownUnicastLimitPortControlMode?
Selects how unknown-unicast (destination-MAC-not-yet-learned) ingress traffic on this port is limited: disabled(1) removes any limit, unknownUnicastLimitPerPortOnly(2) caps it as a percentage of line rate (hpUnknownUnicastLimitPortSingleControlPrct), and unknownUnicastLimitPerPortOnlyKbpsMode(3) caps it at an absolute kbps value (hpUnknownUnicastLimitPortSingleControlKbps).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.2 snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpUnknownUnicastLimitPortControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.2.1 snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpUnknownUnicastLimitPortControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.2.1 i <value>
Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpUnknownUnicastLimitPortControlMode OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.10 | hpicfAdmin | HP-ICF |
| 1.3.6.1.4.1.11.2.14.10.2 | hpicfObjectModules | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.10.2.14 | hpicfRateLimitMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.14.1 | hpicfRateLimitObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.8 | hpicfUnknownUnicastLimitPortObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1 | hpUnknownUnicastLimitPortConfig | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1 | hpUnknownUnicastLimitConfigTable | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1 | hpUnknownUnicastLimitConfigEntry | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.2 | hpUnknownUnicastLimitPortControlMode | HP-ICF-RATE-LIMIT-MIB |