All MIBs › HP-ICF-RATE-LIMIT-MIB › hpIngressRateLimitPortBps
hpIngressRateLimitPortBps
Module: HP-ICF-RATE-LIMIT-MIB
OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBps
OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The maximum bits-per-second of traffic that may be transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to use ingressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that ingress queue. The values for each queue must not exceed the bits-per-second capability of the current network link speed.
What is hpIngressRateLimitPortBps?
Deprecated per-queue ingress rate cap, in bits per second, effective only when hpIngressRateLimitPortControlMode was set to ingressRateLimitPerQueue; each queue's configured value could not exceed the link's actual speed, and the object has since been superseded by Kbps-based per-queue controls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2 snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBps
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2.1 snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBps.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2.1 i <value>
Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBps OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.10 | hpicfAdmin | HP-ICF |
| 1.3.6.1.4.1.11.2.14.10.2 | hpicfObjectModules | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.10.2.14 | hpicfRateLimitMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.14.1 | hpicfRateLimitObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.5 | hpicfIngressRateLimitPortObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1 | hpRateLimitIngressPortConfig | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4 | hpIngressRateLimitPortBpsTable | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1 | hpIngressRateLimitPortBpsEntry | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2 | hpIngressRateLimitPortBps | HP-ICF-RATE-LIMIT-MIB |