HP-ICF-RATE-LIMIT-MIB :: hpIngressBcastLimitPortControlMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HP-ICF-RATE-LIMIT-MIB › hpIngressBcastLimitPortControlMode

hpIngressBcastLimitPortControlMode

Module: HP-ICF-RATE-LIMIT-MIB

OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortControlMode

OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The mode by which this port will be Broadcast-Limited on ingress. If ingressBcastLimitPerPortOnly is configured, there will be a single maximum percentage-based broadcast traffic limit for the entire port. If ingressBcastLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second maximum broadcast traffic rate for the entire port. When ingress Broadcast-limiting is disabled, there are no maximum broadcast traffic controls on ingress for this port.

What is hpIngressBcastLimitPortControlMode?

Selects how broadcast traffic arriving on this port's ingress is limited: disabled(1) applies no cap, ingressBcastLimitPerPortOnly(2) caps it as a percentage of port rate, and ingressBcastLimitPerPortOnlyKbpsMode(3) caps it at an absolute kbps value, protecting the switch from broadcast storms.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2
snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortControlMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2.1
snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortControlMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2.1 i <value>

Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortControlMode OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.10hpicfAdminHP-ICF
1.3.6.1.4.1.11.2.14.10.2hpicfObjectModulesHP-ICF-OID
1.3.6.1.4.1.11.2.14.10.2.14hpicfRateLimitMIBHP-ICF-OID
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.10.2.14.1hpicfRateLimitObjectsHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.6hpicfIngressBcastLimitPortObjectsHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.6.1hpBcastLimitIngressPortConfigHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1hpIngressBcastLimitPortConfigTableHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1hpIngressBcastLimitPortConfigEntryHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2hpIngressBcastLimitPortControlModeHP-ICF-RATE-LIMIT-MIB