HP-ICF-RATE-LIMIT-MIB :: hpICMPRateLimitPortControlMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HP-ICF-RATE-LIMIT-MIB › hpICMPRateLimitPortControlMode

hpICMPRateLimitPortControlMode

Module: HP-ICF-RATE-LIMIT-MIB

OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortControlMode

OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The mode by which inbound ICMP traffic on this port will Rate-Limited. If icmpRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If icmpRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per- second rate for the entire port. When ICMP rate-limiting is disabled, there are no maximum controls on inbound ICMP traffic for this port.

What is hpICMPRateLimitPortControlMode?

Selects how inbound ICMP traffic on this port is rate-limited: disabled(1) applies no limit, portPrct(2) caps it at a single percentage of port rate (hpICMPRateLimitPortPrct), and portKbps(3) caps it at a single kbps value (hpICMPRateLimitPortKbps).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6
snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortControlMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6.1
snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortControlMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6.1 i <value>

Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortControlMode OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.10hpicfAdminHP-ICF
1.3.6.1.4.1.11.2.14.10.2hpicfObjectModulesHP-ICF-OID
1.3.6.1.4.1.11.2.14.10.2.14hpicfRateLimitMIBHP-ICF-OID
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.10.2.14.1hpicfRateLimitObjectsHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.1hpicfICMPRateLimitObjectsHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.1.1hpICMPRateLimitConfigHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1hpICMPRateLimitPortConfigTableHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1hpICMPRateLimitPortConfigEntryHP-ICF-RATE-LIMIT-MIB
1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6hpICMPRateLimitPortControlModeHP-ICF-RATE-LIMIT-MIB