All MIBs › HP-ICF-RATE-LIMIT-MIB › hpICMPRateLimitPortAlarmFlag
hpICMPRateLimitPortAlarmFlag
Module: HP-ICF-RATE-LIMIT-MIB
OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortAlarmFlag
OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether ICMP rate limiting alarm has been sent. When an alarm is sent, this object is set to set(2). Once a management station changes this object to clear(1), an alarm can be sent again for this port.
What is hpICMPRateLimitPortAlarmFlag?
Tracks whether an ICMP rate-limit-exceeded alarm has already fired for this port: it reads set(2) once an alarm has been sent, and an admin writes clear(1) to acknowledge it so a new alarm can be sent again if the limit is exceeded again.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4 snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortAlarmFlag
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4.1 snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortAlarmFlag.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4.1 i <value>
Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortAlarmFlag OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.10 | hpicfAdmin | HP-ICF |
| 1.3.6.1.4.1.11.2.14.10.2 | hpicfObjectModules | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.10.2.14 | hpicfRateLimitMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.14.1 | hpicfRateLimitObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.1 | hpicfICMPRateLimitObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1 | hpICMPRateLimitConfig | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1 | hpICMPRateLimitPortConfigTable | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1 | hpICMPRateLimitPortConfigEntry | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4 | hpICMPRateLimitPortAlarmFlag | HP-ICF-RATE-LIMIT-MIB |