All MIBs › HP-ICF-RATE-LIMIT-MIB › hpEgressRateLimitPortQueueControlMode
hpEgressRateLimitPortQueueControlMode
Module: HP-ICF-RATE-LIMIT-MIB
OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortQueueControlMode
OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The mode by which queues on this port will be rate-limited on egress. If egressRateLimitQueuePrctMode is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue.If egressRateLimitQueueKbpsMode is configured, the maximum transmission-rate values for each of the queues will be expressed in kilobits-per-second. The queues are defined under hpEgressRateLimitPortQueueTable. When egress rate-limiting is disabled, there are no maximum controls on egress for this port.
What is hpEgressRateLimitPortQueueControlMode?
Selects how per-queue egress rate limiting works on this port: disabled(1) applies no per-queue cap, egressRateLimitQueuePrctMode(2) caps each queue as a percentage of port traffic (via hpEgressRateLimitPortQueueTable), and egressRateLimitQueueKbpsMode(3) caps each queue in kilobits per second.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.6 snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortQueueControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.6.1 snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortQueueControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.6.1 i <value>
Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortQueueControlMode OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.10 | hpicfAdmin | HP-ICF |
| 1.3.6.1.4.1.11.2.14.10.2 | hpicfObjectModules | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.10.2.14 | hpicfRateLimitMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.14.1 | hpicfRateLimitObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4 | hpicfRateLimitPortObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1 | hpRateLimitPortConfig | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2 | hpEgressRateLimitPortConfigTable | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1 | hpEgressRateLimitPortConfigEntry | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.6 | hpEgressRateLimitPortQueueControlMode | HP-ICF-RATE-LIMIT-MIB |