All MIBs › HP-ICF-RATE-LIMIT-MIB › hpEgressRateLimitPortControlMode
hpEgressRateLimitPortControlMode
Module: HP-ICF-RATE-LIMIT-MIB
OID (symbolic): HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortControlMode
OID (numeric): 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The mode by which this port will be Rate-Limited on egress. If egressRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If egressRateLimitPerQueue is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If egressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. The queues are defined under hpEgressRateLimitPortPrctTable. When egress rate-limiting is disabled, there are no maximum controls on egress for this port. NOTE : Currently, egressRateLimitPerPortOnlyBpsMode and egressRateLimitPerQueueBpsMode are not supported.
What is hpEgressRateLimitPortControlMode?
Selects how this port's egress traffic is rate-limited: disabled(1) applies no cap, egressRateLimitPerPortOnly(2) or its Kbps variant(6) apply one aggregate limit for the whole port, and egressRateLimitPerQueue(3) applies a separate percentage limit per queue via hpEgressRateLimitPortPrctTable; the two Bps-mode enumerations are currently unsupported.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2 snmpwalk -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2.1 snmpget -v2c -c public <target> HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2.1 i <value>
Start monitoring HP Networking switch (ICMP/bandwidth rate limiting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortControlMode OID value, configure state conditions and alerts, and monitor any HP Networking switch (ICMP/bandwidth rate limiting) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.10 | hpicfAdmin | HP-ICF |
| 1.3.6.1.4.1.11.2.14.10.2 | hpicfObjectModules | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.14.10.2.14 | hpicfRateLimitMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.14.1 | hpicfRateLimitObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4 | hpicfRateLimitPortObjects | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1 | hpRateLimitPortConfig | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2 | hpEgressRateLimitPortConfigTable | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1 | hpEgressRateLimitPortConfigEntry | HP-ICF-RATE-LIMIT-MIB |
| 1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2 | hpEgressRateLimitPortControlMode | HP-ICF-RATE-LIMIT-MIB |