All MIBs › HP-ICF-LINKTEST › hpicfLinkTestAttempts
hpicfLinkTestAttempts
Module: HP-ICF-LINKTEST
OID (symbolic): HP-ICF-LINKTEST::hpicfLinkTestAttempts
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.6.2.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The number of times we have sent link test packets to the destination during the current test. This object will start at zero when the corresponding instance of hpicfLinkTestStatus is set to 'active'. It will increment at the completion of each iteration of the test until either it reaches the value of hpicfLinkTestRepetitions, or the corresponding instance of hpicfLinkTestStatus is set to a value other than 'active'. Note that it is incremented at the completion of each iteration, not when the link test packet is sent, so that the number of failures can be calculated accurately.
What is hpicfLinkTestAttempts?
This read-only counter, from 0 to 65535, tracks how many link test packets have been sent so far in the current test, starting at zero when the test becomes active and incrementing after each completed iteration. Admins compare this against hpicfLinkTestRepetitions to see how far the test has progressed. For example, a value of 7 out of a configured 10 repetitions shows the test is nearly done.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.6.2.1.7 snmpwalk -v2c -c public <target> HP-ICF-LINKTEST::hpicfLinkTestAttempts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.6.2.1.7.1 snmpget -v2c -c public <target> HP-ICF-LINKTEST::hpicfLinkTestAttempts.1
Start monitoring HP ProCurve switch (on-demand physical link/cable diagnostic test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-LINKTEST::hpicfLinkTestAttempts OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (on-demand physical link/cable diagnostic test) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.6 | hpicfLinktest | HP-ICF-LINKTEST |
| 1.3.6.1.4.1.11.2.14.11.1.6.2 | hpicfLinkTestTable | HP-ICF-LINKTEST |
| 1.3.6.1.4.1.11.2.14.11.1.6.2.1 | hpicfLinkTestEntry | HP-ICF-LINKTEST |
| 1.3.6.1.4.1.11.2.14.11.1.6.2.1.7 | hpicfLinkTestAttempts | HP-ICF-LINKTEST |