All MIBs › HP-ICF-GENERIC-RPTR › hpicfGRpSwitchLinkState
hpicfGRpSwitchLinkState
Module: HP-ICF-GENERIC-RPTR
OID (symbolic): HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkState
OID (numeric): 1.3.6.1.4.1.11.2.14.11.4.5.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether this switch link is enabled ('active') or disabled ('redundant') due to one of the following:
- There are more links to this switch than there are repeater segments. - The agent detected a switching loop. - The link is intended as a backup connection for other links on this switch.
There can only be one active link to the switch from each repeater segment, otherwise you will have a switching loop. Therefore, if more than one switch link is connected to repeater ports on the same repeater segment, only one of them may have the value 'active'. All of the others must have the value 'redundant.
What is hpicfGRpSwitchLinkState?
Shows whether this switch link is actively forwarding (active(1)) or held back as redundant(2), which happens when a switch has more links than there are repeater segments, a loop was detected, or the link is meant purely as a standby; only one link per repeater segment to a given switch may be active at a time to avoid a switching loop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.4.5.2.1.4 snmpwalk -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.4.5.2.1.4.1 snmpget -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.4.5.2.1.4.1 i <value>
Start monitoring Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkState OID value, configure state conditions and alerts, and monitor any Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.4 | hpicfGenericRepeater | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.4.5 | hpicfGRpSwitchConfig | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.11.4.5.2 | hpicfGRpSwitchLinkTable | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1 | hpicfGRpSwitchLinkEntry | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1.4 | hpicfGRpSwitchLinkState | HP-ICF-GENERIC-RPTR |