All MIBs › HP-ICF-GENERIC-RPTR › hpSecPtAlarmEnable
hpSecPtAlarmEnable
Module: HP-ICF-GENERIC-RPTR
OID (symbolic): HP-ICF-GENERIC-RPTR::hpSecPtAlarmEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.2.10.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object identifies the action taken when an intrusion occurs. See hpSecPtLearnMode for what constitutes an intrusion. disable. No trap is sent and the port remains enabled. SendTrap. If the hpSecPtIntrusionFlag is set to noIntrusion, the agent will generate an intrusionTrap. SendTrapAndDisablePort. If the hpSecPtIntru- sionFlag is set to noIntrusion, the agent generate an intrusionTrap and disable the port. This value does not apply to repeaters.
What is hpSecPtAlarmEnable?
Controls what happens when a port security intrusion occurs: disable(1) takes no action, sendTrap(2) fires an intrusionTrap, and sendTrapAndDisablePort(3) both traps and shuts the port down (switches only). An admin protecting a sensitive access port would typically choose sendTrapAndDisablePort to automatically stop an unauthorized device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.6 snmpwalk -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpSecPtAlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.6.1 snmpget -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpSecPtAlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.6.1 i <value>
Start monitoring Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-GENERIC-RPTR::hpSecPtAlarmEnable OID value, configure state conditions and alerts, and monitor any Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.2 | icfHub | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10 | hubSecurity | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.2.10.3 | hpSecurePortTable | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.2.10.3.1 | hpSecurePortEntry | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.6 | hpSecPtAlarmEnable | HP-ICF-GENERIC-RPTR |