All MIBs › HP-ICF-GENERIC-RPTR › hpSecPtAddressLimit2
hpSecPtAddressLimit2
Module: HP-ICF-GENERIC-RPTR
OID (symbolic): HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit2
OID (numeric): 1.3.6.1.4.1.11.2.14.2.10.3.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. The current maximum limit is 64. Changing the limit while in these modes clears any addresses for this port in the hpSecureAuthAddrTable. This limit does apply when the learn mode is set to configureSpecific.
What is hpSecPtAddressLimit2?
The current, higher-capacity replacement for hpSecPtAddressLimit, letting an admin cap the number of MAC addresses (1-65535, though the practical maximum is 64) learned on a port under learnFirstN-style modes; changing it clears the port's learned address table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.8 snmpwalk -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.8.1 snmpget -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.8.1 i <value>
Start monitoring Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit2 OID value, configure state conditions and alerts, and monitor any Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.2 | icfHub | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10 | hubSecurity | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.2.10.3 | hpSecurePortTable | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.2.10.3.1 | hpSecurePortEntry | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.8 | hpSecPtAddressLimit2 | HP-ICF-GENERIC-RPTR |