All MIBs › HP-ICF-GENERIC-RPTR › hpSecPtAddressLimit
hpSecPtAddressLimit
Module: HP-ICF-GENERIC-RPTR
OID (symbolic): HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit
OID (numeric): 1.3.6.1.4.1.11.2.14.2.10.3.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. Changing the limit while in these modes clears any addresses for this port in the hpSecureAuthAddrTable. This limit does not apply when the learn mode is set to configureSpecific. This object will return the default value of 1 when hpSecPtAddressLimit2 is greater than 32.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.3 snmpwalk -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.3.1 snmpget -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.2.10.3.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpSecPtAddressLimit.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2 | icfHub | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10 | hubSecurity | HP-ICF |
| 1.3.6.1.4.1.11.2.14.2.10.3 | hpSecurePortTable | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.2.10.3.1 | hpSecurePortEntry | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.3 | hpSecPtAddressLimit | HP-ICF-GENERIC-RPTR |