All MIBs › HP-ICF-GENERIC-RPTR › hpGRpPortMapAutoConfigEnable
hpGRpPortMapAutoConfigEnable
Module: HP-ICF-GENERIC-RPTR
OID (symbolic): HP-ICF-GENERIC-RPTR::hpGRpPortMapAutoConfigEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.11.4.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object has the value 'enabled', when a switch is discovered in the stack, the repeater ports will be evenly distributed across the repeater segments if they had not previously been assigned to segments (in other words, if they are in their default state). If this object has the value 'disabled', this automatic distribution of ports will not occur.
What is hpGRpPortMapAutoConfigEnable?
When enabled, newly discovered switches in a repeater stack automatically get their repeater ports spread evenly across segments, but only for ports still at their default (unassigned) state; disabling it turns off this automatic distribution.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.4.4.1 snmpwalk -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpGRpPortMapAutoConfigEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.4.4.1.1 snmpget -v2c -c public <target> HP-ICF-GENERIC-RPTR::hpGRpPortMapAutoConfigEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.4.4.1.1 i <value>
Start monitoring Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-GENERIC-RPTR::hpGRpPortMapAutoConfigEnable OID value, configure state conditions and alerts, and monitor any Legacy HP ProCurve/ICF repeater/hub (Ethernet concentrator) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.4 | hpicfGenericRepeater | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.4.4 | hpGRpLoadBalancing | HP-ICF-GENERIC-RPTR |
| 1.3.6.1.4.1.11.2.14.11.4.4.1 | hpGRpPortMapAutoConfigEnable | HP-ICF-GENERIC-RPTR |