HP-ICF-DLDP-MIB :: hpicfDldpPortOperStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HP-ICF-DLDP-MIB › hpicfDldpPortOperStatus

hpicfDldpPortOperStatus

Module: HP-ICF-DLDP-MIB

OID (symbolic): HP-ICF-DLDP-MIB::hpicfDldpPortOperStatus

OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.108.1.3.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object provides the operating status of DLDP on ports. A value of unknown (1) indicates that the operating status of DLDP cannot be determined. A value of initial (2) indicates that DLDP is enabled on port but disabled globally. A value of inactive (3) indicates that DLDP is enabled but the physical status of the port is down. A value of unidirectional (4) indicates that a unidirectional link is detected on the port. A value of bidirectional (5) indicates that a bidirectional link is detected on the port.

What is hpicfDldpPortOperStatus?

The DLDP operating status of this port: initial means DLDP is enabled on the port but disabled globally, inactive means the port is physically down, unidirectional flags a detected one-way link, and bidirectional confirms a healthy two-way link; an admin reads this to see exactly why a port isn't showing bidirectional health.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.108.1.3.1.1
snmpwalk -v2c -c public <target> HP-ICF-DLDP-MIB::hpicfDldpPortOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.108.1.3.1.1.1
snmpget -v2c -c public <target> HP-ICF-DLDP-MIB::hpicfDldpPortOperStatus.1

Start monitoring HP switch (Device Link Detection Protocol, unidirectional link detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-DLDP-MIB::hpicfDldpPortOperStatus OID value, configure state conditions and alerts, and monitor any HP switch (Device Link Detection Protocol, unidirectional link detection) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5hpicfSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1hpSwitchCONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.5.1.108hpicfDldpMIBHP-ICF-DLDP-MIB
1.3.6.1.4.1.11.2.14.11.5.1.108.1hpicfDldpConfigurationObjectsHP-ICF-DLDP-MIB
1.3.6.1.4.1.11.2.14.11.5.1.108.1.3hpicfDldpPortStatusTableHP-ICF-DLDP-MIB
1.3.6.1.4.1.11.2.14.11.5.1.108.1.3.1hpicfDldpPortStatusEntryHP-ICF-DLDP-MIB
1.3.6.1.4.1.11.2.14.11.5.1.108.1.3.1.1hpicfDldpPortOperStatusHP-ICF-DLDP-MIB