All MIBs › HP-ICF-CONFIG-MIB › hpicfConfigRecoveryMode
hpicfConfigRecoveryMode
Module: HP-ICF-CONFIG-MIB
OID (symbolic): HP-ICF-CONFIG-MIB::hpicfConfigRecoveryMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.136.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object contains the recovery mode for cfg-restore. Default value of RecoveryMode is enabled.
What is hpicfConfigRecoveryMode?
This value sets whether the device's config-restore recovery mode is enabled or disabled, defaulting to enabled per the description. An admin would use this to control whether the switch attempts some automatic recovery behavior if a config restore operation encounters problems, rather than leaving the device in a possibly broken state. For example, an admin performing a risky restore on a remote, unattended switch would want this left at its default enabled(1) setting to reduce the chance of losing management access.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.136.4.1.5 snmpwalk -v2c -c public <target> HP-ICF-CONFIG-MIB::hpicfConfigRecoveryMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.136.4.1.5.1 snmpget -v2c -c public <target> HP-ICF-CONFIG-MIB::hpicfConfigRecoveryMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.136.4.1.5.1 i <value>
Start monitoring HP ProCurve/HPE networking switch (config save/restore) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-CONFIG-MIB::hpicfConfigRecoveryMode OID value, configure state conditions and alerts, and monitor any HP ProCurve/HPE networking switch (config save/restore) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.136 | hpicfConfig | HP-ICF-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.136.4 | hpicfConfigConfig | HP-ICF-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.136.4.1 | hpicfConfigObjects | HP-ICF-CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.136.4.1.5 | hpicfConfigRecoveryMode | HP-ICF-CONFIG-MIB |