All MIBs › HP-DOT1X-EXTENSIONS-MIB › hpicfDot1xSuppConfigPasswordEncrypted
hpicfDot1xSuppConfigPasswordEncrypted
Module: HP-DOT1X-EXTENSIONS-MIB
OID (symbolic): HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigPasswordEncrypted
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The encrypted form of the password used by supplicant for MD5 authentication. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfDot1xSuppConfigPassword and hpicfDot1xSuppConfigPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
What is hpicfDot1xSuppConfigPasswordEncrypted?
The encrypted form (up to 256 bytes) of the supplicant's MD5 authentication password, usable only when credential encryption is enabled on the device; only one of this object or hpicfDot1xSuppConfigPassword may be set in a given transaction, and this value should only be written back using a string previously read from a compatible HP device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.3 snmpwalk -v2c -c public <target> HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigPasswordEncrypted
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.3.1 snmpget -v2c -c public <target> HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigPasswordEncrypted.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.3.1 s <value>
Start monitoring HP switch/router (802.1X shared-media/multi-supplicant ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigPasswordEncrypted OID value, configure state conditions and alerts, and monitor any HP switch/router (802.1X shared-media/multi-supplicant ports) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.25 | hpicfDot1xMIB | HP-DOT1X-EXTENSIONS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.25.1 | hpicfDot1xMIBObjects | HP-DOT1X-EXTENSIONS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3 | hpicfDot1xSupplicant | HP-DOT1X-EXTENSIONS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1 | hpicfDot1xSuppConfigTable | HP-DOT1X-EXTENSIONS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1 | hpicfDot1xSuppConfigEntry | HP-DOT1X-EXTENSIONS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.3 | hpicfDot1xSuppConfigPasswordEncrypted | HP-DOT1X-EXTENSIONS-MIB |