All MIBs › HM2-PLATFORM-MRP-MIB › hm2AgentDot1qPortMrpLeaveTime
hm2AgentDot1qPortMrpLeaveTime
Module: HM2-PLATFORM-MRP-MIB
OID (symbolic): HM2-PLATFORM-MRP-MIB::hm2AgentDot1qPortMrpLeaveTime
OID (numeric): 1.3.6.1.4.1.248.12.60.1.1.1.3
Node type: OBJECT-TYPE
Type: TimeInterval
Access: read-write
Description:
The MRP Leave time(20..600), in centiseconds.
What is hm2AgentDot1qPortMrpLeaveTime?
This read-write object specifies the MRP (Media Redundancy Protocol) Leave Timer in centiseconds (range 20-600) for a port participating in bridged network redundancy. The Leave Timer controls how long the protocol waits before removing a node from a redundant ring after a failure is detected. An operator tunes this value to balance network stability against convergence speed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.12.60.1.1.1.3 snmpwalk -v2c -c public <target> HM2-PLATFORM-MRP-MIB::hm2AgentDot1qPortMrpLeaveTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.12.60.1.1.1.3.1 snmpget -v2c -c public <target> HM2-PLATFORM-MRP-MIB::hm2AgentDot1qPortMrpLeaveTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.12.60.1.1.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.12 | hm2PlatformMibs | HM2-TC-MIB |
| 1.3.6.1.4.1.248.12.60 | hm2PlatformMRP | HM2-PLATFORM-MRP-MIB |
| 1.3.6.1.4.1.248.12.60.1 | hm2AgentDot1qMrp | HM2-PLATFORM-MRP-MIB |
| 1.3.6.1.4.1.248.12.60.1.1 | hm2AgentDot1qPortMrpTable | HM2-PLATFORM-MRP-MIB |
| 1.3.6.1.4.1.248.12.60.1.1.1 | hm2AgentDot1qPortMrpEntry | HM2-PLATFORM-MRP-MIB |
| 1.3.6.1.4.1.248.12.60.1.1.1.3 | hm2AgentDot1qPortMrpLeaveTime | HM2-PLATFORM-MRP-MIB |