All MIBs › HM2-NAT-MIB › hm2DnatProto
hm2DnatProto
Module: HM2-NAT-MIB
OID (symbolic): HM2-NAT-MIB::hm2DnatProto
OID (numeric): 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The IP protocol (RFC 791) for protocol-independent filtering. The following values are currently supported: o icmp(1): Internet Control Message Protocol (RFC 792) o igmp(2): Internet Group Management Protocol o ipip(3): IP in IP tunneling (RFC 1853) o tcp(4): Transmission Control Protocol (RFC 793) o udp(5): User Datagram Protocol (RFC 768) o esp(6): IPsec Encapsulated Security Payload (RFC 2406) o ah(7): IPsec Authentication Header (RFC 2402) o icmpv6(8): Internet Control Message Protocol for IPv6 o any(9): apply to all protocols
What is hm2DnatProto?
The IP protocol this DNAT rule applies to (icmp, igmp, ipip, tcp, udp, esp, ah, icmpv6, or any), letting an admin scope a redirect to, say, only TCP traffic destined for a web server. Defaults to any.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.80 | hm2NatMib | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1 | hm2NatObjects | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.2 | hm2Dnat | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.2.1 | hm2DnatRules | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.2.1.2 | hm2DnatRulesTables | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.2.1.2.1 | hm2DnatRuleTable | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1 | hm2DnatRuleEntry | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.2.1.2.1.1.9 | hm2DnatProto | HM2-NAT-MIB |