All MIBs › HM2-NAT-MIB › hm21to1IngressIntf
hm21to1IngressIntf
Module: HM2-NAT-MIB
OID (symbolic): HM2-NAT-MIB::hm21to1IngressIntf
OID (numeric): 1.3.6.1.4.1.248.11.80.1.4.2.1.1.9
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-create
Description: The index of the interface on which packets going to the target address will arrive. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
What is hm21to1IngressIntf?
The interface on which packets destined for hm21to1TargetAddress are expected to arrive; must be a valid switch IP or VLAN interface, and only works on physical interfaces if routing mode is enabled on them. Defaults to 0 (unset).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.80 | hm2NatMib | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1 | hm2NatObjects | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4 | hm21to1 | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2 | hm21to1RuleTables | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2.1 | hm21to1RuleTable | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2.1.1 | hm21to1RuleEntry | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2.1.1.9 | hm21to1IngressIntf | HM2-NAT-MIB |