All MIBs › HM2-NAT-MIB › hm21to1EgressIntf
hm21to1EgressIntf
Module: HM2-NAT-MIB
OID (symbolic): HM2-NAT-MIB::hm21to1EgressIntf
OID (numeric): 1.3.6.1.4.1.248.11.80.1.4.2.1.1.10
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-create
Description: The index of the interface from which the new target address can be reached. This has to be either an hm2AgentSwitchIpInterfaceIfIndex or an hm2AgentSwitchIpVlanIfIndex. Note that for physical interfaces this only works if the corresponding hm2AgentSwitchIpInterfaceRoutingMode is set to enable.
What is hm21to1EgressIntf?
The interface from which the translated (hm21to1NewTargetAddress) address can be reached; must be a valid switch IP or VLAN interface, and only works on physical interfaces if routing mode is enabled on them. Defaults to 0 (unset).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.80 | hm2NatMib | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1 | hm2NatObjects | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4 | hm21to1 | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2 | hm21to1RuleTables | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2.1 | hm21to1RuleTable | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2.1.1 | hm21to1RuleEntry | HM2-NAT-MIB |
| 1.3.6.1.4.1.248.11.80.1.4.2.1.1.10 | hm21to1EgressIntf | HM2-NAT-MIB |