HM2-L2REDUNDANCY-DLR-MIB :: hm2DlrBeaconTimeout

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HM2-L2REDUNDANCY-DLR-MIB › hm2DlrBeaconTimeout

hm2DlrBeaconTimeout

Module: HM2-L2REDUNDANCY-DLR-MIB

OID (symbolic): HM2-L2REDUNDANCY-DLR-MIB::hm2DlrBeaconTimeout

OID (numeric): 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: Beacon timeout in microseconds. The Beacon Timeout shall be at least two times the Beacon Interval value.

What is hm2DlrBeaconTimeout?

This read-create value (800-500000 microseconds, default 1960) sets how long the supervisor waits without receiving expected beacons before declaring a ring fault; it must be at least twice hm2DlrBeaconInterval. Admins tune this together with the beacon interval to balance fault-detection speed against false-positive risk from transient delays.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.248hirschmannHIRSCHMANN-GENERIC-ERROR-MIB
1.3.6.1.4.1.248.11hm2ConfigurationMibsHM2-TC-MIB
1.3.6.1.4.1.248.11.40hm2L2RedundancyMibHM2-L2REDUNDANCY-MIB
1.3.6.1.4.1.248.11.40.1hm2L2RedundancyMibObjectsHM2-L2REDUNDANCY-MIB
Numeric OIDNameModule
1.3.6.1.4.1.248.11.40.1.5hm2DlrMibGroupHM2-L2REDUNDANCY-DLR-MIB
1.3.6.1.4.1.248.11.40.1.5.1hm2DlrMibObjectsHM2-L2REDUNDANCY-DLR-MIB
1.3.6.1.4.1.248.11.40.1.5.1.1hm2DlrConfigurationHM2-L2REDUNDANCY-DLR-MIB
1.3.6.1.4.1.248.11.40.1.5.1.1.10hm2DlrConfigTableHM2-L2REDUNDANCY-DLR-MIB
1.3.6.1.4.1.248.11.40.1.5.1.1.10.1hm2DlrConfigEntryHM2-L2REDUNDANCY-DLR-MIB
1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10hm2DlrBeaconTimeoutHM2-L2REDUNDANCY-DLR-MIB

Module

This MIB depends on