All MIBs › HM2-FW-MIB › hm2DynFwProto
hm2DynFwProto
Module: HM2-FW-MIB
OID (symbolic): HM2-FW-MIB::hm2DynFwProto
OID (numeric): 1.3.6.1.4.1.248.11.79.1.2.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The IP protocol (RFC 791) for protocol-independent filtering. The following values are currently supported: o icmp(1): internet control message protocol (RFC 792) o igmp(2): internet group management protocol o ipip(3): IP in IP tunnelling (RFC 1853) o tcp(4): transmission control protocol (RFC 793) o udp(5): user datagram protocol (RFC 768) o esp(6): IPsec encapsulated security payload (RFC 2406) o ah(7): IPsec authentication header (RFC 2402) o icmpv6(8): internet control message protocol for IPv6 o any(9): apply to all protocols
What is hm2DynFwProto?
This read-create enumeration selects which IP protocol a dynamic firewall rule applies to - tcp(4), udp(5), icmp(1), igmp(2), ipip(3), esp(6), ah(7), icmpv6(8), or any(9) to match every protocol. An admin writing a rule to allow only web traffic would set this to tcp(4) and pair it with target port 80/443.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.79 | hm2FwMib | HM2-FW-MIB |
| 1.3.6.1.4.1.248.11.79.1 | hm2FwObjects | HM2-FW-MIB |
| 1.3.6.1.4.1.248.11.79.1.2 | hm2DynFw | HM2-FW-MIB |
| 1.3.6.1.4.1.248.11.79.1.2.2 | hm2DynFwRuleTables | HM2-FW-MIB |
| 1.3.6.1.4.1.248.11.79.1.2.2.1 | hm2DynFwRuleTable | HM2-FW-MIB |
| 1.3.6.1.4.1.248.11.79.1.2.2.1.1 | hm2DynFwRuleEntry | HM2-FW-MIB |
| 1.3.6.1.4.1.248.11.79.1.2.2.1.1.6 | hm2DynFwProto | HM2-FW-MIB |