HM2-DEVMGMT-MIB :: hm2IfaceCableCrossing

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HM2-DEVMGMT-MIB › hm2IfaceCableCrossing

hm2IfaceCableCrossing

Module: HM2-DEVMGMT-MIB

OID (symbolic): HM2-DEVMGMT-MIB::hm2IfaceCableCrossing

OID (numeric): 1.3.6.1.4.1.248.11.10.1.6.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable configures the cable crossing on twisted pair cables. When set to 'mdi', the device does not swap the send and receive line pairs of the TP cable for this port. When set to 'mdix', the device swaps the send and receive line pairs of the TP cable for this port. When set to 'auto-mdix', the port uses the auto crossover mode. 'Unsupported' is shown, if a port does not support cable crossing or auto-negotiation is disabled. It is not possible to set 'unsupported' to any type of port.

What is hm2IfaceCableCrossing?

Configures whether a twisted-pair port swaps its transmit/receive pairs: 'mdi' leaves them unswapped, 'mdix' swaps them, and 'auto-mdix' lets the port auto-detect and correct for straight-through vs. crossover cables; 'unsupported' appears if the port lacks this capability or has auto-negotiation disabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.10.1.6.1.1.3
snmpwalk -v2c -c public <target> HM2-DEVMGMT-MIB::hm2IfaceCableCrossing

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.10.1.6.1.1.3.1
snmpget -v2c -c public <target> HM2-DEVMGMT-MIB::hm2IfaceCableCrossing.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.10.1.6.1.1.3.1 i <value>

Start monitoring Hirschmann HiOS industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-DEVMGMT-MIB::hm2IfaceCableCrossing OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.248hirschmannHIRSCHMANN-GENERIC-ERROR-MIB
1.3.6.1.4.1.248.11hm2ConfigurationMibsHM2-TC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.248.11.10hm2DeviceMgmtMibHM2-DEVMGMT-MIB
1.3.6.1.4.1.248.11.10.1hm2DeviceMgmtMibObjectsHM2-DEVMGMT-MIB
1.3.6.1.4.1.248.11.10.1.6hm2IfaceGroupHM2-DEVMGMT-MIB
1.3.6.1.4.1.248.11.10.1.6.1hm2IfaceTableHM2-DEVMGMT-MIB
1.3.6.1.4.1.248.11.10.1.6.1.1hm2IfaceEntryHM2-DEVMGMT-MIB
1.3.6.1.4.1.248.11.10.1.6.1.1.3hm2IfaceCableCrossingHM2-DEVMGMT-MIB