All MIBs › HIRSCHMANN-MMP4-BASICL2-MIB › hmAgentSwitchBroadcastControlMode
hmAgentSwitchBroadcastControlMode
Module: HIRSCHMANN-MMP4-BASICL2-MIB
OID (symbolic): HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentSwitchBroadcastControlMode
OID (numeric): 1.3.6.1.4.1.248.15.1.2.8.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the broadcast traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
What is hmAgentSwitchBroadcastControlMode?
Enables broadcast storm recovery: when broadcast traffic on a port exceeds the upper threshold the switch discards it until it falls back below the lower threshold. The thresholds are 20 percent and 10 percent on a 10M link and 5 percent and 2 percent on a 100M link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.15.1.2.8.2 snmpwalk -v2c -c public <target> HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentSwitchBroadcastControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.15.1.2.8.2.1 snmpget -v2c -c public <target> HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentSwitchBroadcastControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.15.1.2.8.2.1 i <value>
Start monitoring Hirschmann MMP4 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentSwitchBroadcastControlMode OID value, configure state conditions and alerts, and monitor any Hirschmann MMP4 industrial Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.15 | hmPlatform4 | HIRSCHMANN-MMP4-BASICL2-MIB |
| 1.3.6.1.4.1.248.15.1 | hmPlatform4BasicL2 | HIRSCHMANN-MMP4-BASICL2-MIB |
| 1.3.6.1.4.1.248.15.1.2 | hmAgentConfigGroup | HIRSCHMANN-MMP4-BASICL2-MIB |
| 1.3.6.1.4.1.248.15.1.2.8 | hmAgentSwitchConfigGroup | HIRSCHMANN-MMP4-BASICL2-MIB |
| 1.3.6.1.4.1.248.15.1.2.8.2 | hmAgentSwitchBroadcastControlMode | HIRSCHMANN-MMP4-BASICL2-MIB |