HIRSCHMANN-MMP4-BASICL2-MIB :: hmAgentPortDefaultType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHIRSCHMANN-MMP4-BASICL2-MIBhmAgentPortDefaultType

hmAgentPortDefaultType

Module: HIRSCHMANN-MMP4-BASICL2-MIB

OID (symbolic): HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentPortDefaultType

OID (numeric): 1.3.6.1.4.1.248.15.1.2.13.1.11

Node type: OBJECT-TYPE

Type: OBJECT IDENTIFIER

Access: read-write

Description: This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by hmAgentPortType.

The set of possible values for this object is the same as the set defined for the hmAgentPortType object.

This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode.

If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.

The valid values for this object are:

dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.15.1.2.13.1.11
snmpwalk -v2c -c public <target> HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentPortDefaultType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.15.1.2.13.1.11.1
snmpget -v2c -c public <target> HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentPortDefaultType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.248.15.1.2.13.1.11.1 s <value>

Start monitoring Hirschmann MMP4 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HIRSCHMANN-MMP4-BASICL2-MIB::hmAgentPortDefaultType OID value, configure state conditions and alerts, and monitor any Hirschmann MMP4 industrial Ethernet switch from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.248hirschmannHM2-TC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.248.15hmPlatform4HIRSCHMANN-MMP4-BASICL2-MIB
1.3.6.1.4.1.248.15.1hmPlatform4BasicL2HIRSCHMANN-MMP4-BASICL2-MIB
1.3.6.1.4.1.248.15.1.2hmAgentConfigGroupHIRSCHMANN-MMP4-BASICL2-MIB
1.3.6.1.4.1.248.15.1.2.13hmAgentPortConfigTableHIRSCHMANN-MMP4-BASICL2-MIB
1.3.6.1.4.1.248.15.1.2.13.1hmAgentPortConfigEntryHIRSCHMANN-MMP4-BASICL2-MIB
1.3.6.1.4.1.248.15.1.2.13.1.11hmAgentPortDefaultTypeHIRSCHMANN-MMP4-BASICL2-MIB