HILLSTONE-STATISTICS-MIB

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › HILLSTONE-STATISTICS-MIB

Category: Hillstone

Description: Tracks session, connection, and traffic throughput statistics on Hillstone Networks firewalls.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HILLSTONE-STATISTICS-MIB?

HILLSTONE-STATISTICS-MIB is a Hillstone Networks enterprise MIB that tracks session, connection, IPSec VPN, and traffic throughput statistics on their firewall/security appliances. It exposes performance and security counters such as the number of online users, active IPSec tunnels and security associations, and detailed per-tunnel IPSec statistics including inbound octets, decompressed octets, packets, drops, replay drops, and authentication failures. Its monitoring value is centered on software/service health -- tracking VPN tunnel stability and throughput, detecting authentication failures or replay-attack drops that could signal a security issue, and gauging overall session load via online user counts -- functioning as a performance and security-event monitoring MIB rather than hardware sensor telemetry. No explicit dependency on external standard MIBs is indicated, though it likely coexists with standard IF-MIB interface counters on the same device. It is deployed on Hillstone Networks firewall/UTM appliances used for perimeter security and IPSec VPN termination. Network engineers evaluating or troubleshooting this functionality can download the HILLSTONE-STATISTICS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HILLSTONE-STATISTICS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Hillstone Networks firewall/UTM appliance

Monitoring Examples

An operator would poll onlineUserNum alongside hillstoneIPSecGlobalActiveTunnels and hillstoneIPSecGlobalActiveSas to gauge current VPN load, then drill into hillstoneIPSecStatisticTable/hillstoneIPSecStatisticEntry keyed by hillstoneIpsecTunnelID to inspect per-tunnel hillstoneIPSecInOctets, hillstoneIPSecInDrops, and hillstoneIPSecInAuthFails. A tunnel showing a rising hillstoneIPSecInReplayDrops or hillstoneIPSecInAuthFails count would indicate a possible replay attack or misconfigured pre-shared key/certificate on that specific tunnel. A sudden drop in hillstoneIPSecGlobalActiveTunnels compared to the configured tunnel count would reveal VPN peers going down.

What Can Be Monitored

  • online user count
  • active IPSec tunnels/SAs
  • per-tunnel inbound octets/packets
  • per-tunnel drop counts
  • authentication and replay failure counts
Imported Objects

From HILLSTONE-SMI

hillstoneStatisticsOBJECT-IDENTITY

From RFC-1212

Counter
Counter32
Counter64
Gauge
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using hillstoneEventHttpAtk OID:

Select a Hillstone Networks firewall/UTM appliance (session/IPsec VPN statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hillstoneEventHttpAtk into the Find box to locate it in the OID tree, then select it and click OK. The http attack occurs during the last statistcs period. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Hillstone Networks security appliance statistics MIB; provides traffic, attack detection, and performance metrics from Hillstone firewalls.

Start monitoring Hillstone Networks firewall/UTM appliance (session/IPsec VPN statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HILLSTONE-STATISTICS-MIB