All MIBs › HILLSTONE-IF-MIB › hillstoneIfSecIpAddress3
hillstoneIfSecIpAddress3
Module: HILLSTONE-IF-MIB
OID (symbolic): HILLSTONE-IF-MIB::hillstoneIfSecIpAddress3
OID (numeric): 1.3.6.1.4.1.28557.2.6.1.3.1.13
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: The second ip address3 of the interface.
What is hillstoneIfSecIpAddress3?
Reports the fourth secondary IP address configured on this interface, in addition to its primary and other secondary addresses. An admin uses this when the interface has been provisioned with multiple additional subnets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28557.2.6.1.3.1.13 snmpwalk -v2c -c public <target> HILLSTONE-IF-MIB::hillstoneIfSecIpAddress3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28557.2.6.1.3.1.13.1 snmpget -v2c -c public <target> HILLSTONE-IF-MIB::hillstoneIfSecIpAddress3.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hillstoneIfSecIpAddress3.1
Start monitoring Hillstone Networks firewall/UTM appliance (WAN/LAN interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HILLSTONE-IF-MIB::hillstoneIfSecIpAddress3 OID value, configure state conditions and alerts, and monitor any Hillstone Networks firewall/UTM appliance (WAN/LAN interface config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.28557 | hillstone | HILLSTONE-SMI |
| 1.3.6.1.4.1.28557.2 | hillstoneMibs | HILLSTONE-SMI |
| 1.3.6.1.4.1.28557.2.6 | hillstoneInterface | HILLSTONE-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28557.2.6.1 | hillstoneIfObjects | HILLSTONE-IF-MIB |
| 1.3.6.1.4.1.28557.2.6.1.3 | hillstoneIfAttriTable | HILLSTONE-IF-MIB |
| 1.3.6.1.4.1.28557.2.6.1.3.1 | hillstoneIfAttriEntry | HILLSTONE-IF-MIB |
| 1.3.6.1.4.1.28557.2.6.1.3.1.13 | hillstoneIfSecIpAddress3 | HILLSTONE-IF-MIB |