All MIBs › HH3C-T1-MIB › hh3ct1LineCode
hh3ct1LineCode
Module: HH3C-T1-MIB
OID (symbolic): HH3C-T1-MIB::hh3ct1LineCode
OID (numeric): 1.3.6.1.4.1.25506.2.29.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the line code type used on the T1 interface.
What is hh3ct1LineCode?
Selects the T1 line encoding, either ami or b8zs (the default). An admin sets this to match the carrier's required line code, since a mismatch here causes bipolar violations and CRC errors on the circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.29.2.1.4 snmpwalk -v2c -c public <target> HH3C-T1-MIB::hh3ct1LineCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.29.2.1.4.1 snmpget -v2c -c public <target> HH3C-T1-MIB::hh3ct1LineCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.29.2.1.4.1 i <value>
Start monitoring H3C router with T1 WAN interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-T1-MIB::hh3ct1LineCode OID value, configure state conditions and alerts, and monitor any H3C router with T1 WAN interfaces from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.29 | hh3cT1 | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.29.2 | hh3ct1Table | HH3C-T1-MIB |
| 1.3.6.1.4.1.25506.2.29.2.1 | hh3ct1Entry | HH3C-T1-MIB |
| 1.3.6.1.4.1.25506.2.29.2.1.4 | hh3ct1LineCode | HH3C-T1-MIB |