HH3C-SNA-DLSW-MIB :: hh3cdlswRemotePeerVersion

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-SNA-DLSW-MIB › hh3cdlswRemotePeerVersion

hh3cdlswRemotePeerVersion

Module: HH3C-SNA-DLSW-MIB

OID (symbolic): HH3C-SNA-DLSW-MIB::hh3cdlswRemotePeerVersion

OID (numeric): 1.3.6.1.4.1.25506.8.37.2.1.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hh3cdlswTConnOperState of `connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner.

If an implementation chooses to keep hh3cdlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.

What is hh3cdlswRemotePeerVersion?

The DLSw standard version (first octet) and release (second octet) reported by the partner DLSw peer, learned from its capabilities exchange message; returns a zero-length string before that exchange happens or on a non-standard partner. Admins check this to confirm both ends of a DLSw peer connection speak a compatible protocol version.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.37.2.1.1.2
snmpwalk -v2c -c public <target> HH3C-SNA-DLSW-MIB::hh3cdlswRemotePeerVersion

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.37.2.1.1.2.1
snmpget -v2c -c public <target> HH3C-SNA-DLSW-MIB::hh3cdlswRemotePeerVersion.1

Start monitoring H3C router (SNA Data Link Switching over IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-SNA-DLSW-MIB::hh3cdlswRemotePeerVersion OID value, configure state conditions and alerts, and monitor any H3C router (SNA Data Link Switching over IP) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.8hh3cRhwHH3C-OID-MIB
1.3.6.1.4.1.25506.8.37hh3cdlswHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.8.37.2hh3cdlswTConnHH3C-SNA-DLSW-MIB
1.3.6.1.4.1.25506.8.37.2.1hh3cdlswRemotePeerTableHH3C-SNA-DLSW-MIB
1.3.6.1.4.1.25506.8.37.2.1.1hh3cdlswRemotePeerEntryHH3C-SNA-DLSW-MIB
1.3.6.1.4.1.25506.8.37.2.1.1.2hh3cdlswRemotePeerVersionHH3C-SNA-DLSW-MIB