All MIBs › HH3C-SNA-DLSW-MIB › hh3cdlswCircuitState
hh3cdlswCircuitState
Module: HH3C-SNA-DLSW-MIB
OID (symbolic): HH3C-SNA-DLSW-MIB::hh3cdlswCircuitState
OID (numeric): 1.3.6.1.4.1.25506.8.37.5.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection.
While all of the specified values may be returned from a GET operation, the only SETable value is `disconnectPending'. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was `connected') to bring the circuit down to the `disconnected' state. Both the partner DLSw and local end station(s) should be notified as appropriate.
This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function.
What is hh3cdlswCircuitState?
The current lifecycle state of this circuit (e.g. circuitPending, circuitEstablished, connected, disconnectPending, haltPending). Setting this object to disconnectPending is the only supported way to tear a circuit down via SNMP; DLSw does not support re-establishing a disconnected circuit this way, since that's left to the end stations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.37.5.1.1.14 snmpwalk -v2c -c public <target> HH3C-SNA-DLSW-MIB::hh3cdlswCircuitState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.37.5.1.1.14.1 snmpget -v2c -c public <target> HH3C-SNA-DLSW-MIB::hh3cdlswCircuitState.1
Start monitoring H3C router (SNA Data Link Switching over IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-SNA-DLSW-MIB::hh3cdlswCircuitState OID value, configure state conditions and alerts, and monitor any H3C router (SNA Data Link Switching over IP) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8 | hh3cRhw | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8.37 | hh3cdlsw | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.8.37.5 | hh3cdlswCircuit | HH3C-SNA-DLSW-MIB |
| 1.3.6.1.4.1.25506.8.37.5.1 | hh3cdlswCircuitTable | HH3C-SNA-DLSW-MIB |
| 1.3.6.1.4.1.25506.8.37.5.1.1 | hh3cdlswCircuitEntry | HH3C-SNA-DLSW-MIB |
| 1.3.6.1.4.1.25506.8.37.5.1.1.14 | hh3cdlswCircuitState | HH3C-SNA-DLSW-MIB |