All MIBs › HH3C-RMON-EXT-MIB › hh3cprialarmRisingThreshold
hh3cprialarmRisingThreshold
Module: HH3C-RMON-EXT-MIB
OID (symbolic): HH3C-RMON-EXT-MIB::hh3cprialarmRisingThreshold
OID (numeric): 1.3.6.1.4.1.25506.8.4.4.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3).
After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold.
This object may not be modified if the associated alarmStatus object is equal to valid(1).
What is hh3cprialarmRisingThreshold?
This sets the rising threshold for the sampled statistic, above which a single alarm event fires when the value crosses up from below. An admin configures this so a rising alarm is raised only once per crossing, with no repeat alarm until the value first drops below the falling threshold and crosses back up again. For example, setting this to 90 on a CPU utilization sample generates one alarm the first time utilization climbs to 90% or above, without repeating on every subsequent sample still above 90%.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.4.4.1.1.8 snmpwalk -v2c -c public <target> HH3C-RMON-EXT-MIB::hh3cprialarmRisingThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.4.4.1.1.8.1 snmpget -v2c -c public <target> HH3C-RMON-EXT-MIB::hh3cprialarmRisingThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.8.4.4.1.1.8.1 i <value>
Start monitoring H3C/HPE Comware switch/router (extended RMON traffic statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-RMON-EXT-MIB::hh3cprialarmRisingThreshold OID value, configure state conditions and alerts, and monitor any H3C/HPE Comware switch/router (extended RMON traffic statistics) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8 | hh3cRhw | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8.4 | hh3crmonExtend | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.8.4.4 | hh3cperformance | HH3C-RMON-EXT-MIB |
| 1.3.6.1.4.1.25506.8.4.4.1 | hh3cprialarmTable | HH3C-RMON-EXT-MIB |
| 1.3.6.1.4.1.25506.8.4.4.1.1 | hh3cprialarmEntry | HH3C-RMON-EXT-MIB |
| 1.3.6.1.4.1.25506.8.4.4.1.1.8 | hh3cprialarmRisingThreshold | HH3C-RMON-EXT-MIB |