All MIBs › HH3C-POWER-ETH-EXT-MIB › hh3cPsePowerMaxValue
hh3cPsePowerMaxValue
Module: HH3C-POWER-ETH-EXT-MIB
OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cPsePowerMaxValue
OID (numeric): 1.3.6.1.4.1.25506.2.14.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The object specifies the max poe power for lanswitch. The value should between the power currently and the max power.
What is hh3cPsePowerMaxValue?
Read-write Integer32 setting the maximum PoE power budget the switch (lanswitch) will allow, which must fall between the power currently in use and the hardware's absolute maximum.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.5 snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPsePowerMaxValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.5.1 snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPsePowerMaxValue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.14.5.1 i <value>
Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cPsePowerMaxValue OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.14 | hh3cPowerEthernetExt | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.14.5 | hh3cPsePowerMaxValue | HH3C-POWER-ETH-EXT-MIB |