All MIBs › HH3C-POWER-ETH-EXT-MIB › hh3cPsePortPeakPower
hh3cPsePortPeakPower
Module: HH3C-POWER-ETH-EXT-MIB
OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cPsePortPeakPower
OID (numeric): 1.3.6.1.4.1.25506.2.14.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The object specifies the peak power which has been consumed by the port. It is defined as the highest measured value of power in milliWatts that has been consumed by the port. Its value is only reset when link is lost, the port is PoE disabled or when it is manually reset by the user asspecified below. It is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
What is hh3cPsePortPeakPower?
Read-write Integer32 in milliwatts recording the highest power a PoE port has drawn since its last reset (link loss, PoE disable, or manual reset). Writing 0 clears the peak back to zero for a fresh measurement window; writing any other value is rejected with an error, so it's not a real power-limit control despite being writable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.1.1.3 snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPsePortPeakPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.1.1.3.1 snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPsePortPeakPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.14.1.1.3.1 i <value>
Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cPsePortPeakPower OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.14 | hh3cPowerEthernetExt | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.14.1 | hh3cPsePortTable | HH3C-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.25506.2.14.1.1 | hh3cPsePortEntry | HH3C-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.25506.2.14.1.1.3 | hh3cPsePortPeakPower | HH3C-POWER-ETH-EXT-MIB |