All MIBs › HH3C-POWER-ETH-EXT-MIB › hh3cPsePortFaultDescription
hh3cPsePortFaultDescription
Module: HH3C-POWER-ETH-EXT-MIB
OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cPsePortFaultDescription
OID (numeric): 1.3.6.1.4.1.25506.2.14.1.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The object supports the fault category of the IETF Power MIB [1] pethPsePortDetectionStatus object. A textual description containing more information about the nature of this fault is provided by this object. Typically this will detail the precise PoE hardware state which is causing the pethPsePortDetectionStatus object to be in the 'fault' state. It is a DisplayString of up to 255 characters.
What is hh3cPsePortFaultDescription?
A read-write DisplayString (up to 255 chars) that gives a human-readable detail of why a PoE port's pethPsePortDetectionStatus is in the 'fault' state, e.g. describing the specific PoE hardware fault condition. An admin reads this alongside the fault status to diagnose why a port stopped powering a device without digging into hardware logs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.1.1.2 snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPsePortFaultDescription
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.1.1.2.1 snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPsePortFaultDescription.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.14.1.1.2.1 s <value>
Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cPsePortFaultDescription OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.14 | hh3cPowerEthernetExt | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.14.1 | hh3cPsePortTable | HH3C-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.25506.2.14.1.1 | hh3cPsePortEntry | HH3C-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.25506.2.14.1.1.2 | hh3cPsePortFaultDescription | HH3C-POWER-ETH-EXT-MIB |