HH3C-POWER-ETH-EXT-MIB :: hh3cPOEThresholdACMaximum

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHH3C-POWER-ETH-EXT-MIBhh3cPOEThresholdACMaximum

hh3cPOEThresholdACMaximum

Module: HH3C-POWER-ETH-EXT-MIB

OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cPOEThresholdACMaximum

OID (numeric): 1.3.6.1.4.1.25506.2.14.8.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Input threshold AC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 264.0V and larger than 90.0V. And it should be larger than the hh3cPOEThresholdACMinimum.

What is hh3cPOEThresholdACMaximum?

Read-write OCTET STRING holding a null-terminated numeric string that sets the high-voltage alarm threshold for AC input, constrained between 90.0V and 264.0V and required to stay above hh3cPOEThresholdACMinimum.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.8.1.2
snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPOEThresholdACMaximum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.8.1.2.1
snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPOEThresholdACMaximum.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.14.8.1.2.1 s <value>

Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cPOEThresholdACMaximum OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.14hh3cPowerEthernetExtHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.14.8hh3cPOEPowerObjectsHH3C-POWER-ETH-EXT-MIB
1.3.6.1.4.1.25506.2.14.8.1hh3cPOEThresholdLimitObjsHH3C-POWER-ETH-EXT-MIB
1.3.6.1.4.1.25506.2.14.8.1.2hh3cPOEThresholdACMaximumHH3C-POWER-ETH-EXT-MIB