HH3C-POWER-ETH-EXT-MIB :: hh3cPOEDCOutStateModuleNum

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHH3C-POWER-ETH-EXT-MIBhh3cPOEDCOutStateModuleNum

hh3cPOEDCOutStateModuleNum

Module: HH3C-POWER-ETH-EXT-MIB

OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cPOEDCOutStateModuleNum

OID (numeric): 1.3.6.1.4.1.25506.2.14.8.3.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The module number on this POE power. It is the maximum of the hh3cPOEDCOutStateIndex.

What is hh3cPOEDCOutStateModuleNum?

Read-only Integer32 giving the number of DC output states tracked, and the maximum valid value for hh3cPOEDCOutStateIndex.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.8.3.1
snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPOEDCOutStateModuleNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.8.3.1.1
snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cPOEDCOutStateModuleNum.1

Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cPOEDCOutStateModuleNum OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.14hh3cPowerEthernetExtHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.14.8hh3cPOEPowerObjectsHH3C-POWER-ETH-EXT-MIB
1.3.6.1.4.1.25506.2.14.8.3hh3cPOEDCOutStateObjectsHH3C-POWER-ETH-EXT-MIB
1.3.6.1.4.1.25506.2.14.8.3.1hh3cPOEDCOutStateModuleNumHH3C-POWER-ETH-EXT-MIB