HH3C-POWER-ETH-EXT-MIB :: hh3cMainPsePowerPriority

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHH3C-POWER-ETH-EXT-MIBhh3cMainPsePowerPriority

hh3cMainPsePowerPriority

Module: HH3C-POWER-ETH-EXT-MIB

OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePowerPriority

OID (numeric): 1.3.6.1.4.1.25506.2.14.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Describes or controls the priority of the PSE. The priority will be used by the PSE policy to prevent from power overloading. If the priority of PSE is set to critical, the PSE will turn into guaranteed mode. The priority could be used by a control mechanism that prevents power overloading by disconnecting PSEs with lower power priority. PSEs that connect devices critical to the application should be set to higher priority.

What is hh3cMainPsePowerPriority?

Read-write priority (critical/high/low) assigned to a PSE, used by the overload-prevention policy to decide which PSEs get disconnected first; setting a PSE to critical forces it into guaranteed power mode so devices like emergency phones stay powered under overload.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.2.1.7
snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePowerPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.2.1.7.1
snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePowerPriority.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.14.2.1.7.1 i <value>

Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePowerPriority OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.14hh3cPowerEthernetExtHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.14.2hh3cMainPseTableHH3C-POWER-ETH-EXT-MIB
1.3.6.1.4.1.25506.2.14.2.1hh3cMainPseEntryHH3C-POWER-ETH-EXT-MIB
1.3.6.1.4.1.25506.2.14.2.1.7hh3cMainPsePowerPriorityHH3C-POWER-ETH-EXT-MIB