All MIBs › HH3C-POWER-ETH-EXT-MIB › hh3cMainPsePeakPower
hh3cMainPsePeakPower
Module: HH3C-POWER-ETH-EXT-MIB
OID (symbolic): HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePeakPower
OID (numeric): 1.3.6.1.4.1.25506.2.14.2.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The object specifies the peak power which has been consumed for PoE. It is defined as the highest measured value of power in milliWatts that has been consumed at any one point in time by the sum of the PoE ports. Its value is only reset when the unit is powered on or when it is manually reset by the user as specifiedbelow. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts). Writing a value of zero to this object resets its value to zero. Writing any other value to this object has noeffect on its value and an error is returned.
What is hh3cMainPsePeakPower?
Read-write Integer32 in Watts recording the highest total PoE power drawn across all ports since the unit was powered on or last manually reset; writing 0 clears it, writing anything else is rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.2.1.3 snmpwalk -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePeakPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.14.2.1.3.1 snmpget -v2c -c public <target> HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePeakPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.14.2.1.3.1 i <value>
Start monitoring H3C Comware Ethernet switch (extended PoE port/PSE status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-POWER-ETH-EXT-MIB::hh3cMainPsePeakPower OID value, configure state conditions and alerts, and monitor any H3C Comware Ethernet switch (extended PoE port/PSE status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.14 | hh3cPowerEthernetExt | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.14.2 | hh3cMainPseTable | HH3C-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.25506.2.14.2.1 | hh3cMainPseEntry | HH3C-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.25506.2.14.2.1.3 | hh3cMainPsePeakPower | HH3C-POWER-ETH-EXT-MIB |