All MIBs › HH3C-LI-MIB › hh3cLIMACStreamFields
hh3cLIMACStreamFields
Module: HH3C-LI-MIB
OID (symbolic): HH3C-LI-MIB::hh3cLIMACStreamFields
OID (numeric): 1.3.6.1.4.1.25506.2.111.3.1.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object displays what attributes will be compared to identify traffic. interface: indicates that traffic on the stated interface is to be intercepted dstMacAddress: indicates that traffic destined to a given address should be intercepted srcMacAddress: indicates that traffic sourced from a given address should be intercepted ethernetPid: indicates that traffic with a stated Ethernet Protocol Identifier should be intercepted dSap: indicates that traffic with an certain 802.2 LLC Destination SAP should be intercepted sSap: indicates that traffic with an certain 802.2 LLC Source SAP should be intercepted
At least one of the bits has to be set in order to activate an entry. If multiple bits are set, traffic to be intercepted must be satisfied with all set attributes.
What is hh3cLIMACStreamFields?
A bitmask selecting which Layer-2 attributes, interface, destination MAC, source MAC, Ethernet protocol ID, LLC DSAP, or LLC SSAP, this MAC-based filter checks; at least one bit must be set to activate the entry, and if several bits are set, traffic must match all of the selected attributes to be intercepted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.111.3.1.1.1.1 snmpwalk -v2c -c public <target> HH3C-LI-MIB::hh3cLIMACStreamFields
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.111.3.1.1.1.1.1 snmpget -v2c -c public <target> HH3C-LI-MIB::hh3cLIMACStreamFields.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.111.3.1.1.1.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hh3cLIMACStreamFields.1
Start monitoring H3C carrier-grade routers and switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-LI-MIB::hh3cLIMACStreamFields OID value, configure state conditions and alerts, and monitor any H3C carrier-grade routers and switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.111 | hh3cLI | HH3C-LI-MIB |
| 1.3.6.1.4.1.25506.2.111.3 | hh3cLIMACStream | HH3C-LI-MIB |
| 1.3.6.1.4.1.25506.2.111.3.1 | hh3cLIMACStreamObjects | HH3C-LI-MIB |
| 1.3.6.1.4.1.25506.2.111.3.1.1 | hh3cLIMACStreamTable | HH3C-LI-MIB |
| 1.3.6.1.4.1.25506.2.111.3.1.1.1 | hh3cLIMACStreamEntry | HH3C-LI-MIB |
| 1.3.6.1.4.1.25506.2.111.3.1.1.1.1 | hh3cLIMACStreamFields | HH3C-LI-MIB |