HH3C-ISSU-MIB :: hh3cIssuLastOpType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-ISSU-MIB › hh3cIssuLastOpType

hh3cIssuLastOpType

Module: HH3C-ISSU-MIB

OID (symbolic): HH3C-ISSU-MIB::hh3cIssuLastOpType

OID (numeric): 1.3.6.1.4.1.25506.2.133.1.1.2.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the previous hh3cIssuOp value. It will be updated after a new hh3cIssuOp is set and delivered to the upgrade process.

Command Remarks

none If the user sets this object to 'none', agent will return a success without performing an upgrade operation. done If this object returns any value other than 'none', setting this to 'done' will do the required cleanup of the previous upgrade operation and get the system ready for a new upgrade operation. test Check the version compatibility and upgrade method for the given set of image files. install For all the image entities listed in the hh3cIssuUpgradeImageTable, perform the required upgrade operation listed in that table. rollback Abort the current install operation and roll back to the previous version.

What is hh3cIssuLastOpType?

Reports which ISSU operation, test, install, rollback, or done, was performed just before the current one, letting an admin reconstruct the sequence of upgrade steps that led to the device's present state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.133.1.1.2.7
snmpwalk -v2c -c public <target> HH3C-ISSU-MIB::hh3cIssuLastOpType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.133.1.1.2.7.1
snmpget -v2c -c public <target> HH3C-ISSU-MIB::hh3cIssuLastOpType.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hh3cIssuLastOpType.1

Start monitoring H3C modular router/switch (In-Service Software Upgrade) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-ISSU-MIB::hh3cIssuLastOpType OID value, configure state conditions and alerts, and monitor any H3C modular router/switch (In-Service Software Upgrade) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.133hh3cIssuUpgradeHH3C-ISSU-MIB
1.3.6.1.4.1.25506.2.133.1hh3cIssuUpgradeMibObjectsHH3C-ISSU-MIB
1.3.6.1.4.1.25506.2.133.1.1hh3cIssuUpgradeGroupHH3C-ISSU-MIB
1.3.6.1.4.1.25506.2.133.1.1.2hh3cIssuOpHH3C-ISSU-MIB
1.3.6.1.4.1.25506.2.133.1.1.2.7hh3cIssuLastOpTypeHH3C-ISSU-MIB