All MIBs › HH3C-FDMI-MIB › hh3cFdmiHbaPortSupportedFC4Type
hh3cFdmiHbaPortSupportedFC4Type
Module: HH3C-FDMI-MIB
OID (symbolic): HH3C-FDMI-MIB::hh3cFdmiHbaPortSupportedFC4Type
OID (numeric): 1.3.6.1.4.1.25506.2.127.7.1.1.2.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The supported FC-4 types attribute registered for this port on this VSAN. This is an array of 256 bits (32 bytes). The order of the bits in the 256-bit (32-byte) value is represented in network-byte order. If no FC-4 types has been registered, then the value of this object is the zero-length string.
What is hh3cFdmiHbaPortSupportedFC4Type?
This OCTET STRING, sized 0 or 32 bytes, is a 256-bit bitmask registered by the port indicating which FC-4 upper-layer protocols (such as SCSI-FCP) it supports, or a zero-length string if none was registered. Admins use it to confirm a port advertises support for the expected upper-layer protocol before relying on it for storage traffic. An all-zero-length value would tell the admin the HBA port never registered any FC-4 type with the fabric, which could explain why it isn't appearing correctly in zoning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.127.7.1.1.2.1.2 snmpwalk -v2c -c public <target> HH3C-FDMI-MIB::hh3cFdmiHbaPortSupportedFC4Type
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.127.7.1.1.2.1.2.1 snmpget -v2c -c public <target> HH3C-FDMI-MIB::hh3cFdmiHbaPortSupportedFC4Type.1
Start monitoring H3C Fibre Channel fabric switch (Fabric Device Management Interface/HBA inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-FDMI-MIB::hh3cFdmiHbaPortSupportedFC4Type OID value, configure state conditions and alerts, and monitor any H3C Fibre Channel fabric switch (Fabric Device Management Interface/HBA inventory) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.127 | hh3cSan | HH3C-VSAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.127.7 | hh3cFdmi | HH3C-FDMI-MIB |
| 1.3.6.1.4.1.25506.2.127.7.1 | hh3cFdmiObjects | HH3C-FDMI-MIB |
| 1.3.6.1.4.1.25506.2.127.7.1.1 | hh3cFdmiInfo | HH3C-FDMI-MIB |
| 1.3.6.1.4.1.25506.2.127.7.1.1.2 | hh3cFdmiHbaPortTable | HH3C-FDMI-MIB |
| 1.3.6.1.4.1.25506.2.127.7.1.1.2.1 | hh3cFdmiHbaPortEntry | HH3C-FDMI-MIB |
| 1.3.6.1.4.1.25506.2.127.7.1.1.2.1.2 | hh3cFdmiHbaPortSupportedFC4Type | HH3C-FDMI-MIB |