HH3C-EVB-MIB :: hh3cFlex10RemSchCir

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-EVB-MIB › hh3cFlex10RemSchCir

hh3cFlex10RemSchCir

Module: HH3C-EVB-MIB

OID (symbolic): HH3C-EVB-MIB::hh3cFlex10RemSchCir

OID (numeric): 1.3.6.1.4.1.25506.2.134.3.2.1.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Committed Information Rate (CIR) of the remote S-channel. If a Description TLV with format 0 has not been received, it returns 0.

What is hh3cFlex10RemSchCir?

Reports the committed bandwidth, in Mbps, that the remote end of this S-channel has been guaranteed; it reads 0 until the peer's format-0 description TLV has been received.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.134.3.2.1.5
snmpwalk -v2c -c public <target> HH3C-EVB-MIB::hh3cFlex10RemSchCir

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.134.3.2.1.5.1
snmpget -v2c -c public <target> HH3C-EVB-MIB::hh3cFlex10RemSchCir.1

Start monitoring H3C switch (Ethernet Virtual Bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-EVB-MIB::hh3cFlex10RemSchCir OID value, configure state conditions and alerts, and monitor any H3C switch (Ethernet Virtual Bridging) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.134hh3cEvbHH3C-EVB-MIB
1.3.6.1.4.1.25506.2.134.3hh3cFlex10ObjectsHH3C-EVB-MIB
1.3.6.1.4.1.25506.2.134.3.2hh3cFlex10RemoteSchannelTableHH3C-EVB-MIB
1.3.6.1.4.1.25506.2.134.3.2.1hh3cFlex10RemoteSchannelEntryHH3C-EVB-MIB
1.3.6.1.4.1.25506.2.134.3.2.1.5hh3cFlex10RemSchCirHH3C-EVB-MIB

Module

This MIB depends on